Avaya programming and use, Installation And Use Manual, Page: 151 / 468

Programming System Options
Pool Programming
4-53
Programming
4
To assign pools to a pooled extension:
1. Press
f00ss#314
.
2. Enter the system extension number to be programmed.
There is a steady red light next to each button that has a line assigned and a flashing red light
next to each button that has a pool assigned. To remove all existing pool assignments, press
r
before selecting a pool.
3. Enter the desired pool access code (880, 881, 882, or 883). For example, to select pool 881,
press
881
.
4. Do one of the following:
■
If you want to assign the pool to the first available button with lights, press
D
until a
display similar to the following appears:
Pool Ext Assign 15 P881
1 Assigned
■
If you want to remove a pool assignment, press
D
until a display similar to the
following appears:
Pool Ext Assign 15 P881
2 Not Assigned
■
For auxiliary pools only, if you want to assign the pool to a specific button, press
3
. A
display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
Then press a button with lights to assign the auxiliary pool to that button. If you use option
3 after an auxiliary pool has been assigned, the auxiliary pool moves from the old button to
the new button you select.
5. Do one of the following:
■
To assign another pool for this extension, press
n
or
p
until the pool access
code appears on the display. Then repeat Step 4.
■
To program another extension, press
N
+
P
and begin at Step 2.
6. Select another procedure, or exit programming mode.