Avaya programming and use, Installation And Use Manual, Page: 143 / 468

Programming System Options
Line Access Mode (#313)
4-45
3. Press
D
until the appropriate value appears.
■
1 = Regular dial tone (the factory setting)
■
2 = Machine (outside line) dial tone
4. To program another extension, press
n
or
p
until the extension number appears
on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Line Access Mode (#313)
4
Use this feature to identify individual extensions that are to operate as key extensions even though
the system is configured for Hybrid mode. If an extension’s Line Access Mode is changed to Key,
individual lines can be assigned to specific buttons on that extension’s telephone regardless of
whether they are part of a pool.
This feature applies only to systems of Release 2.0 or later that are configured for Hybrid mode.
Considerations
4
■
Extension 10 operates as a key extension regardless of how the system is configured. The
Line Access Mode for extension 10 cannot be changed.
■
Users at extensions programmed as key extensions cannot access pools either by pressing
pool buttons or by dialing pool access codes.
■
When an extension is changed from Pooled to Key, any previously assigned pool buttons are
removed from the extension and Pool Access Restriction (#315) is set to No Access.
Additionally, the extension is programmed with factory settings for Line Assignment (#301),
Line Access Restriction (#302), Automatic Line Selection, and Line Ringing.
■
When an extension is changed from Key to Pooled, any previously assigned line buttons are
removed from the extension and Pool Access Restriction (#315) is set to No Restriction.
Additionally, the extension is programmed with factory settings for Pool Line Assignment
(#314), Pool Extension Assignment (#314), Automatic Line Selection, and Line Ringing.
Programming
4
To change the Line Access Mode setting for a specific extension:
1. Press
f00ss#313
.
2. Enter the desired extension number. For example, to program extension 18, press
18
.
3. Press
D
until the appropriate value appears:
■
1 = Pooled—(When this is chosen, the factory setting is all extensions except 10.)
■
2 = Key—(When this is chosen, the factory setting is extension 10 only.)