Avaya programming and use, Installation And Use Manual, Page: 224 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Direct Extension Dial Features
7-12
■
The Direct Extension Dial Button returns to the status (on/off) it was in before a power
failure occurred or System Reset (#728) was used.
■
Direct Extension Dial affects incoming calls only on lines identified using Direct Extension
Dial Lines (#205).
■
If Direct Extension Dial is on, callers hear ringing when the call is transferred regardless of
the Music-on-Hold (#602) or Ring on Transfer (#119) setting.
■
By default, unanswered calls return to extension 10. You can use Transfer Return Extension
(#306) to specify a different Transfer Return Extension for extension 10. In this case, all
unanswered Direct Extension Dial calls return to the specified extension as do unanswered
calls manually transferred by extension 10.
■
If Do Not Disturb (F01) is active at a directly dialed extension, the call returns to extension 10
(or its transfer return extension), unless Call Forwarding (F11), Call Coverage Rings, or
VMS Cover Rings is used or on.
Programming
7
To assign or unassign a Direct Extension Dial Button with lights at extension 10:
1. Press
f00ss#113
.
2. Do one of the following:
■
If you want to assign Direct Extension Dial to the first available button, press
D
until a display similar to the following appears:
DXD Button
1 Assigned
-
Ext10
■
If you want to unassign Direct Extension Dial, press
D
until a display similar to the
following appears:
DXD Button
2 Not Assigned
(the factory setting)
■
If you want to assign Direct Extension Dial to a specific button, press
3
. The display
reads:
DXD Button
3 Select a Button
Then press a programmable button with lights to assign Direct Extension Dial to that
button.
3. Select another procedure, or exit programming mode.
4. Label the Direct Extension Dial Button at extension 10.
Using the Direct Extension Dial Button
7
To turn Direct Extension Dial on, press the Direct Extension Dial Button at extension 10. The
green light is on steady and Direct Extension Dial is on. If calls are ringing when you turn Direct
Extension Dial on, the calls are answered immediately by the system.