Avaya programming and use, Installation And Use Manual, Page: 345 / 468

Using Auxiliary Equipment
Modems
9-29
Programming
9
To program a modem for sending only:
1. Do one of the following:
■
If extension X is a key extension, use Line Assignment (#301) to assign one or more
lines to extension X.
■
If extension X is a pooled extension, use Pool Extension Assignment (#314) to assign
the pools you want the modem to use to extension X. Also use Line Assignment (#301)
to assign any individual lines you want the modem to use to extension X.
2. If the modem only dials outside the system, set Automatic Line Selection for extension X to
select outside lines first. If you also use the modem for calls within the system, set Automatic
Line Selection to select intercom first and include a 9 or a pool access code and a couple of
pauses in the modem’s dialing sequence for outside calls.
3. Set Line Ringing for all lines and pools assigned to extension X to No Ring.
4. Set Automatic Extension Privacy (#304) for extension X to Assigned.
5. Set the auto answer feature of the modem to Off.
Send and Receive Modem
9
If you need to place and receive calls with the modem, use the setup shown in Figure 9-13 . This
setup makes line A the primary modem line but keeps the line available for users at other
extensions when all other lines are busy.
Figure 9-13. Send and Receive Modem
Make sure extension Y is not assigned as a Call Waiting (#316) extension, Pickup
Group Extension (#501), Calling Group Extension (#502), Night Service Group
Extension (#504), or Hunt Group Extension (#505).
PARTNER
ACS
Modem
Line A
Lines
Ext
X
MODEM