Avaya programming and use, Installation And Use Manual, Page: 452 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
E-12
Extension Telephone Programming Flow Chart—How to Use
1 1
To use the Extension Telephone Programming Flow Chart, follow these instructions first:
To Program at an extension, use the following procedure:
■
To Start programming:
— Press
f00
— The green light next to buttons on which lines or pools are assigned for the extension show the
current Line Ringing settings. You can program the remaining buttons with telephone
numbers, extension numbers, or system features.
■
To assign a name to the extension, press
i
, and then enter the character codes.
■
To Erase the current programming from a button, press the button, then press
!
:
— Press the programmed button
— Press
!
■
To End Programming Mode:
— Press
f00
2.0
3.0
= Factory setting
= Button with lights required
= Button with lights recommended
= PARTNER ACS Revision 2.0 or later
= PARTNER ACS Revision 3.0 or later
Icon Description
6.0
= PARTNER ACS Revision 6.0 or later