826
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Functions
Automatic Receptions
Destination number
DTMF
Destination number
x
Specifies the in-house destination to which the PBX should automatically
transfer calls after the caller inputs a DTMF suffix dialling digit 0 to 9.
Possible entries:
Internal number of a subscriber
Internal number of a group
Internal number of a voice mailbox
Internal number of another automatic reception
*
under
DTMF
1
-
9
: All internal numbers for subscribers, groups, voice
mailboxes and automatic receptions that start with a number marked with *
can be selected directly by redialling.
Notes:
If the caller enters
*
e.g. for DTMF 4: All internal subscribers, groups,
voice mailboxes and automatic receptions whose phone numbers start
with 4 (4xxx) can be reached by directly redialling their phone number.
If the caller enters
*
: The subscriber is given a maximum of 10 seconds
in which to enter each digit. If this time period is exceeded, or if they dial
an invalid phone number (subscriber, group, automatic reception), the
announcement if the destination is busy/does not reply is played, and the
caller will be automatically connected with the automatic reception they
called previously.
Note that an internal subscriber or a group must have at least
Only
incoming, with emergency call
exchange line authorisation to enable
them to answer a call transferred by the automatic reception.
