590
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
COMfortel DECT
4. In the first
Function
list field select one of the following options:
---
: Enables any function to be entered.
[Function]: Assigns the selected function to the key.
When selecting a function, the fields
Name
and
Tmpl. for the
programming function
are pre-assigned accordingly.
5. In the
Name
entry field, enter a name for the key or, if necessary,
change the predefined name.
Note:
The name is shown on the display after pressing the function key
on a COMfortel DECT 900/900C Handset.
6. In the
Tmpl. for the programming function
entry field, enter a
programming function on the PBX or replace the placeholder for the
specified programming function. Possible entries:
Digits and the characters * and #
UserPIN
: Requires user PIN to be entered
IdentNumber
: Requires the identification number to be entered
SC
: Requires a short-code dialling number or external number to be
entered
MSN
,
MSN/DDI
: Requires your own external numbers to be entered
Phone number
: Requires an external number to be entered
Subscriber
: Requires an internal subscriber number to be entered
Subscriber/group
: Requires an internal subscriber number/internal
number of a line group to be entered
