COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
991
Settings – Administration
IP Configuration
when modifying the port (e. g. http://192.168.55.13:8081). A change of the
port should be made for security reasons especially if the PBX has to be
accessible from the Internet (via a router and a fixed IP address).
You can view the ports already configured on the
Overview > Ports
page.
Change the webserver port by entering another port number (port) with the
range
1
to
65535
.
HTTPS port of the webserver
Port 443 is used for accessing the web server by default. The address can
thus be entered as follows: http://192.168.55.13, for example. Only when
accessing via Ethernet the value (e. g. 4432 instead of 443) has to be
entered when modifying the port (e. g. https://192.168.55.13:8081). A
change of the port should be made for security reasons especially if the PBX
has to be accessible from the Internet (via a router and a fixed IP address).
You can view the ports already configured on the
Overview > Ports
page.
Change the webserver port by entering another port number (port) in the
range
1
to
65535
.
Caution:
A port change will be made out of security reasons
especially if the PBX has to be reachable from the Internet
(via router and fixed IP address).
Caution:
A port change will be made out of security reasons
especially if the PBX has to be reachable from the Internet
(via router and fixed IP address).
