COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
809
Settings – Routing
Soft-LCR 4.0
The PBX uses
Price per minute
for internal calculations and display
purposes during calls that are initiated by an LCR subscriber and perhaps a
Call Through user and routed via the corresponding provider.
The
Price per minute
refers to the currency entered in the PBX (
Functions
> Call allowance accounts
under
CHARGES
).
Metering pulse interval 1st pulse
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider
Seconds the provider assigns the first meter pulse after the connection has
been established (after CONNECT).
Note:
This meter pulse is fully billed by the provider even if the call is
ended before this time has elapsed.
Second pulse
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider
Charge pulse time unit used to bill a call after the first metering pulse.
Note:
For second pulses of differing lengths, enter the most unfavourable
meter pulse.
