COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
593
Settings – Subscriber (scr.)
COMfortel DECT
7. Click
Save
.
Note:
The PBX begins to distribute the data to the mobile handsets in
question. If a mobile handset is currently not ready for the data transfer
(disabled, out of range or busy with a call), the PBX makes an attempt
with the next mobile handset after a few minutes until all of the data is
distributed. During the data transfer (duration: up to two minutes), the
mobile handset is not available and "Copying from PBX" is shown on the
display.
8. Click
Close
.
Restoring a Phone Book from the PBX
If you have accidentally deleted one or more phone book entries on your
mobile handset, you can retrieve the contact data. This will restore your
complete phone book because all contact data of the DECT contact group
to which you are assigned are again copied into your mobile handset.
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
Internal S
0
port (only provided on the COMmander 4/8S
0
module or
COMmander 4/8S
0
-R module available as an option)
•
Configured internal numbers for the base station
