1002
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
IP Configuration
SFTP SERVER
SFTP server
The SFTP network protocol is used for the secure data transfer between the
PBX and external programmes. For this purpose, the PBX uses an SFTP
server from which call data files can be downloaded.
Enable the SFTP server if you want to forward this file to external
programmes (e.g. evaluation programmes).
A password is required.
8 bis 32 Stellen:
•
Digits:
0
-
9
•
Characters:
a
-
z
,
A
-
Z
, no German umlauts and ß
•
Special characters
- _ . ! ~ * ' ( ) & = + $ ,
Notes:
To change current passwords, click on
Edit passwords
.
For registering at the SFTP server of the PBX an external programme
requires the user name and password. The user name is predefined
netstorage
and displayed under
User name
.
A coloured bar under the entry field shows the security level of the
password (red = low level, green = high level).
Passwords with a low security level can not be saved.
Caution:
A high level does not necessarily indicate a
secure password as this can also be reached by entering
names and birth dates in connection with special
characters. However, names and birth dates should not be
used as passwords.