856
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Functions
LAN TAPI
Use PBX Call Assist
Requirements:
•
PBX Call Assist function enabled (optional, see chapter Functions,
Uses, Concepts > Activation)
PBX Call Assist is a CTI software available from Auerswald. Its use must be
switched on in the PBX.
All available TAPI lines are administrated by the corresponding server
software UCServer. Other TAPI applications cannot be used in parallel.
Further steps:
•
Install the server and client software. You will find the installation files on
the Internet (see
).
SUBSCRIBER
New
Selects a LAN TAPI subscriber from the configured phones and adds it to
the list. All subscribers that should be controlled over a PC must be
configured for LAN-TAPI.
Note:
If PBX Call Assist is switched on, all available TAPI lines will
instead be administrated by the corresponding UCServer server
software.
