630
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
Properties / Function overview
Internal phone
For external calls, the prefix of the
Exchange line access number
is
required.
Direct exchange line phone
When picking up the receiver, an external line is requested instantly. For
internal calls, the prefix
**
is required.
Direct exchange line request
The PBX automatically distinguishes between internal and external
numbers with the analysis of the digit sequence and the adjustment of the
dialled phone number and the internal numbering plan.
Notes:
The selection
Direct exchange line request
is only available for IP
DECT phones as well as COMfortel 1200 IP and COMfortel C-400. If you
want to use this function for other phones, you must switch on the
system-wide automatic exchange line request (page
Administration >
Exchange line request
).
The behaviour of the IP system phones when picking up the receiver,
depends on the default account selection (see manual of the phone). For
some IP system phones, the default account can be determined by the
settings for the exchange line request of the PBX.
