98
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Internal Phone Numbers
Internal Phone Numbers
Internal numbers must be configured for the internal ports so that the
connected end devices are accessible. Each connected end device
receives a subscriber number.
If multiple internal end devices need to be accessible via a phone number,
a common group for the internal subscribers must first be configured.
Internal phone are also needed to make e. g. connections to devices, voip
accounts or functions.
Note:
It is a good idea to create a phone numbering plan for the internal
numbers before allocation and then use the following steps to transmit
this to the PBX.
Proceed as follows for configuration:
•
Create internal phone numbers for subscribers.
–
Using the Configuration Manager (page
Subscriber (scr.) > Phone
numbers
)
•
Create internal phone numbers for groups.
–
Using the Configuration Manager (page
Groups > Phone numbers
)
•
Create internal phone numbers for Voice mail/fax boxes.
–
Using the Configuration Manager (page
Devices > Voice mail/fax
boxes > Phone numbers
)
•
Create internal numbers for door stations and announcement outputs.
–
Using the Configuration Manager (page
Devices > Device wizard
)
•
Create internal numbers for alarms.
–
Using the Configuration Manager (page
Devices > Alarms
)
