Auerswald COMmander 6000 Advanced Information Download

Page: 704 / 1164

704

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Devices

Voice mail/fax boxes

Automatic clean-up

Perform at memory utilisation



If the maximum number of stored messages or the maximum

recording capacity of the box (between

and

%) is reached, the oldest

messages marked as read will be deleted as soon as new messages arrive.
Archived messages will not be deleted.

Note:

If the clean-up fails, this information will be logged and if

necessary sent as e-mail.

E-mail transfer

Requirements:

•

Configured outgoing mail server (under

Administration > E-mail >

Outgoing mail server

)

Outgoing mail server

Standard

The e-mails are transferred via the default outgoing mail server.

Name

of an outgoing mail server: The e-mails are transferred via the

selected outgoing mail server.

Send e-mail in HTML format



E-mails are sent in text format.

Summary of Contents for COMmander 6000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMmander 6000

Reviews:

Related manuals for COMmander 6000

Brands by name

Popular brands

Auerswald COMmander 6000, Advanced Information

Search results

Summary of Contents for COMmander 6000

Reviews:

Related manuals for COMmander 6000

Brands by name

Popular brands