1042
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
System Messages
URL format for hyperlinks
Select the format for the link in system e-mails to the system message
overview on the
Monitoring > System messages
page.
with IPv4 address
Link starts with https: and the PBX's IPv4 address.
with IPv6 address
Link starts with https: and the PBX's IPv6 address (if present).
User-defined
A URL prefix defined by the user is set.
URL prefix
Requirements:
•
user-defined URL format
network-specific part of the URL which comes before the device-specific
part of the URL. This enables you to call hyperlinks from a phone that is not
on the PBX's internal network.
Example: Input
https://www.auerswald.de
for this link
https://
www.auerswald.de/statics/html/index.htm#page_systemlogfiles.html
Logo
Select the logo to be used on system e-mails.