COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
381
Configuration Manager
Introduction to the Configuration Manager
Creating, Deleting, Searching for, and Sorting Table Entries
Creating Entries
1. Click
New
.
2. Fill in the empty entry fields.
3. Click
Save
.
4. Repeat steps 1 to 3 to create additional entries.
Notes:
If you want to create multiple entries simultaneously, enter the required
range in the
From
and
To
entry fields, and then click
Save
.
In extendible lists the lower toolbar displays information about the actual
and maximum possible number of entries in the table. Dongle functions
(identified by
) have three numbers. In this case, the second
number is the active number and the third is the maximum number that
can be enabled via the dongle.
Deleting entries
1. Mark the entry and click
Delete
.
Searching for entries
1. Click in the open field in the header of the column that you want to
search, such as
Number
or
Name
and enter the search term.
Slider for making a setting. Sometimes, the exact values
are displayed in front or behind the slider.
