COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
787
Settings – Devices
Action URLs
The automatically generated subscriber password is displayed only once.
Therefore, copy the subscriber password to the clipboard and then close the
dialogue.
ACTION URLS (OUTGOING)
Name
Freely selectable name. This name is used to identify the Action URL within
the PBX.
Action URL
Enter the corresponding Action URL. The Action URL requires the entry of
a protocol, an IP/URL and a request that is understood by the receiving
device (example: http://phoneIP/remote_control?action=HANGUP). You
will find further information in the manual of the corresponding device.).
Configure
Opens the configuration of the Action URL.
Event type
