COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
1067
Appendix Hardware
Connecting Devices to the 2TSM (R) Module
2. Connect the
TS11
terminal (or
TS21
) to the operating voltage input of
your door terminal system (e. g. labelled
V
or
DC/AC
).
3. Connect the
TGnd
terminal to the ground connection input of your door
terminal system (e. g. labelled
0V
or
GND
).
4. Connect the
TNF1
terminal (or
TNF2
) to the low-frequency input/output
of your door terminal system (e. g. labelled
NF
).
Further steps:
•
To finish commissioning, you need to configure the COMmander 2TMS
(R) module in the Configuration Manager and set up the corresponding
door terminal.