COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
197
Functions, Uses, Concepts
Voice mail/Fax Boxes
Voice Mailbox
A voice mailbox assumes the task of an answering machine. Depending on
the setting, it accepts incoming calls and stores recorded messages as
audio files (*.wav).
The configuration of the box can be as follows:
•
Configuring the maximum recording capacity (MB).
•
Enabling the automatic clean-up).
•
Configuring additional properties (
Message forwarding
,
Automatic
replay of new messages
,
Remote access
,
Language of the
announcements
,
E-mail transfer
on incoming message, if memory is
full or in case of failure of automatic clean-up).
•
Enabling
Call pick-up
for the voice mailbox and the
Groups(s)/Voice
mailbox(es)
authorisation for the owners/users under
Pick-up
(see
Subscriber (scr.) > Properties > Authorisations
).
•
Selecting further users and enabling or disabling their authorisations
(
Administrate announcements and settings
).
Notes:
A directory structure is created on the data storage device; you should
not change this structure.
The data storage device must have at least 50 MB free memory.
We recommend you replace the COMmander VMF(-R) module's
memory card every two years. Only use recommended memory cards.
You will find suitable recommendations on the Internet (see Auerswald:
, FONtevo:
using the search
term
COMmander VMF module
).
