806
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Routing
Soft-LCR 4.0
Management Area Codes/Area Code Ranges
Proceed as follows:
•
Using the Configuration Manager (page
Routing > Soft-LCR 4.0 >
Netze/LCR Import > Configure
)
Area codes/area code ranges
Digit sequence for an area code or area code range. (Select
Neu
to
enter.)
A prefix contains the prefix or all of the prefixes from the area that should be
collected for the network (e.g., local phone network, regional network, inter-
national network).
Name
Freely selectable name. This name is used for identification within the PBX.
New
Adds a new area code/area code range to the list.
Up to 1000 entries can be created for all networks in total.
Delete
Deletes the entries marked in the list.
