Auerswald COMmander 6000 Advanced Information Download Page 808

Page: 808 / 1164

808

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Routing

Soft-LCR 4.0

Provider

no LCR

The dial attempt is initiated without a provider area code.

generate busy

The dial attempt is ended and a busy signal is issued.

Provider name: The dial attempt is initiated using the area code entered
under

Routing > Soft-LCR 4.0 > Providers

Note:

During the dial attempt, if the selected provider under

Main

provider

is busy, the selected provider under

1st fallback provider

attempted, etc. If still no connection is established during the dial with the

2nd fallback provider

, a busy signal is issued.

Price per connection

Proceed as follows:

•

Separately for main provider, 1st and 2nd fallback provider.

Indicates the fee a provider charges for the establishment of a connection,
based on the currency entered in the PBX (page

Functions > Call

allowance accounts

Price per minute

Proceed as follows:

•

Separately for main provider, 1st and 2nd fallback provider

Summary of Contents for COMmander 6000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands

Auerswald COMmander 6000, Advanced Information

Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands