278
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Phoning
Transferring
can now initiate a third call that connects the second and third communi-
cation partners with each other and then continue phoning with your first
communication partner.
During a query call, proceed as follows:
1. Press the
Flash key
or the
Query key
.
2. Dial
5
.
3. Enter a phone number. Possible entries:
External number
(for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number
(for exchange line request type Direct exchange
line phone: with preceding **)
Internal number of the individual phone
(for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group
(for exchange line request type Direct
exchange line phone: with preceding **)
As soon as the subscriber being called picks up the receiver, you will
make a third call.
Important:
To use this function on ISDN and system phones, the
function must be supported via a function key or via the menu by the
respective phone (optional, see manual for the phone).
4. Proceed as required.
•
To connect the second and third communication partner and to
perform a one-to-one call with the first communication partner, press
the
Flash key
or the
Query key
and dial
4
.
