COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
439
Settings – Public switched tel. networks
ISDN connections
Dial level
The selection of the dial level (Location, National, International) is country-
specific. Depending on the country and the settings for the local area code
above, a dial level must be selected (example: In Belgium, local area codes
do not exist. Here, the dial level
Location
must not be selected).
Note:
After the port settings once have been made correctly, no further
changes should be made.
Source suitable for clock synchronisation
This port is used as source for the clock synchronisation and serves
as clock master for the PBX. Thus, interfering noise during calls are
avoided.
Note:
Select a port a source that is synchronous to the ISDN exchange
line.
Layer 1 permanently active
Requirements:
•
External S
0
port (optional, see Technical Data in the Operating
Constructions)
