Auerswald COMmander 6000 Advanced Information Download Page 511

Page: 511 / 1164

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

511

Settings – Public switched tel. networks

Voice over IP (VoIP)

Method of number presentation suppression

Requirements:

•

the VoIP provider supports the number presentation suppression
service attribute

•

number presentation suppression is enabled for the subscriber

Area of the From header in which the VoIP provider expects to receive the
number presentation suppression.

No display text

If number presentation suppression is switched on, an empty display text is
sent in the From header.

Anonymous

The sent display text in the From header is "anonymous" if number
presentation suppression is switched on.

User Anonymous

If number presentation suppression is switched on, both the display text and
the User name section in the From header contain "anonymous".

Note:

Number presentation suppression in accordance with RFC 3325,

by using a privacy header, is also used automatically.

Summary of Contents for COMmander 6000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands

Auerswald COMmander 6000, Advanced Information

Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands