Auerswald COMmander 6000 Advanced Information Download

Page: 73 / 1164

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Functions, Uses, Concepts

Activation

Activation

The basic assembly offers the following unlockable functions/resources for
the PBXs:

•

2 VoIP channels for internal IP and Internet telephony (SIP-compliant in
accordance with RFC 3261; support for VoIP Codec G.711 µ-Law/a-
Law)

•

2 voice mail channels for voice mail functions with 4 voice mailboxes

•

10 configurations

•

6000 call data records

•

Call Through calls (Call Through for 4 lines)

•

LAN-TAPI for 8 subscribers

•

LCR for 8 subscribers

Important:

Operating the PBX without system release is not possible.

It is not possible to use the voice mail channels without inserted USB
memory stick (not included in the scope of delivery).

A total of three VoIP and voicemail channels channels is available. Using
the second voice mail channel will result in the loss of a VoIP channel.

The fax function is not included in the basic assembly.

In the Auerswald/FONtevo online shop you can extend the PBX with the
following functions/resources against a fee:

Note:

The PBX dongle required for the extension is part of the basic

device.

Summary of Contents for COMmander 6000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMmander 6000

Reviews:

Related manuals for COMmander 6000

Brands by name

Popular brands

Auerswald COMmander 6000, Advanced Information

Search results

Summary of Contents for COMmander 6000

Reviews:

Related manuals for COMmander 6000

Brands by name

Popular brands