manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Audi parking system

134

•

To ensure that the acoustic parking aid works properly, the 

sensors and the lens of the reversing camera must be kept clean 
and free of snow and ice. Please observe the additional notes from 

⇒

page 143 onwards.

•

Please refer to the notes on towing 

⇒

page 138.

Applies to vehicles: with parking system advanced

Reversing camera (Rear View)

The reversing camera image in the MMI display shows the 
area behind the vehicle.

Parking mode

There are two different parking modes available when you park your 
vehicle with the help of the reversing camera. These are referred to 
as “Parking mode 1” 

⇒

page 136 and “Parking mode 2” 

⇒

page 137.

“Parking mode 1” 

⇒

fig. 145 can, for example, be used when 

parking your vehicle in a carport or a garage 

⇒

page 136.

“Parking mode 2” 

⇒

fig. 146 can be used, for example, when 

parking your vehicle at the roadside 

⇒

page 137.

When you activate the reversing camera 

⇒

page 131 the MMI 

display will automatically show “Parking mode 1”. You can switch to 
“Parking mode 2” by pressing the control button Mode 

 

⇒

page 136, fig. 150. Press the control button Mode repeatedly to 

switch between “Parking mode 1” and “Parking mode 2”.

Orientation lines and area markings

Orientation lines and area markings (

⇒

page 136, fig. 149 and 

⇒

page 137, fig. 151) are also projected onto the reversing camera 

images. They differ, depending on the parking mode you have 
selected. These orientation markings are intended to assist the 
driver when parking and manoeuvring in tight spaces. They are 
projected onto the image at road surface level (not on a gradient).

At the latest when the orientation lines and blue area markings 
overlap with vehicles or other objects the distance to the vehi-
cles/objects is no longer sufficient 

⇒

page 142.

The orientation lines and blue area markings will not be displayed if 
the boot lid is open or the factory-fitted power socket for the trailer 
is in use 

⇒

page 138. This may not apply if the power socket was 

NOT factory-fitted.

You can adjust the settings in the MMI to select which system you 
want to be displayed on the MMI screen 

⇒

page 140:

•

Graphic display, or

•

Reversing camera images (Rear View), or

•

Automatic (switches automatically between graphic display and 

reversing camera), or

Fig. 145  Viewed from 
above: Parking mode 1

Fig. 146  Viewed from 
above: Parking mode 2

A

A

document_0900452a81793dcc.book  Seite 134  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
Toyota YARIS LIFTBACK 2009 Quick Reference Manual preview
YARIS LIFTBACK 2009
Brand: Toyota Pages: 13
Westfalia 316 145 Manual preview
316 145
Brand: Westfalia Pages: 71
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
CITROËN C4 CACTUS Handbook preview
C4 CACTUS
Brand: CITROËN Pages: 301
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20

Brands by name

Popular brands

Load more brands