manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Instruments and warning/indicator lamps

17

Controls

Safety

Driving tips

General maintenance

Self-help

Technical data

Applies to vehicles: with towing bracket

Trailer turn signals 

The indicator lamp flashes when the turn signals are 
operated while towing a caravan or trailer.

The indicator lamp 

 flashes when the turn signals are operated, 

provided a caravan or trailer is correctly attached and connected to 
the vehicle.

The indicator lamp will not flash if one of the turn signals on the 
trailer fails.

Seat belt warning lamp 

The warning lamp acts as a reminder to fasten the seat 
belts.

After switching on the ignition, the warning lamp 

 will remain lit 

until the driver and front passenger (if applicable) have fastened 
their seat belts. When the vehicle has gathered speed you will also 
hear a warning chime.

For further information on the seat belts 

⇒

page 160.

Emission control system 

If the warning lamp lights up continuously you should take your 
vehicle to a qualified workshop as soon as possible in order to have 
the fault rectified.

If the warning lamp flashes drive on at reduced speed and seek 
professional help in order to avoid damage to the catalytic 
converter.

For further information on the catalytic converter 

⇒

page 195.

Main beam headlights 

The indicator lamp 

 lights up when the main beams are on or 

when the headlight flasher is operated.

For further information on the main beam headlights 

⇒

page 58.

Applies to vehicles: with cruise control system

Cruise control 

The indicator lamp 

 in the instrument cluster lights up when the 

cruise control system is operating.

Anti-lock brake system (ABS) 

The warning lamp monitors the ABS and the electronic 
differential lock (EDL).

The warning lamp 

 lights up for a few seconds when the ignition 

is switched on and while the engine is being started. The lamp goes 
out again once the system has run through an automatic test 
sequence.

There is a fault in the ABS if:

•

the warning lamp 

 does not light up when the ignition is 

switched on,

•

the warning lamp does not go out again after a few seconds,

•

the warning lamp lights up when the vehicle is moving.

The vehicle can still be braked in the normal way (except that the 
ABS control function is out of action). Please take the vehicle to a 
qualified workshop as soon as possible. For further information on 
the ABS 

⇒

page 187.

If a fault occurs in the ABS, the ESP warning lamp will also light up.

document_0900452a81793dcc.book  Seite 17  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Mazda 2 2016 Owner'S Manual preview
2 2016
Brand: Mazda Pages: 720
U & Me Brothers LK-168A Manual preview
LK-168A
Brand: U & Me Brothers Pages: 6
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2
Jeep WG Grand Cherokee 2002 Service Manual preview
WG Grand Cherokee 2002
Brand: Jeep Pages: 74
Nav TV NTV-KIT041 Operation Instructions preview
NTV-KIT041
Brand: Nav TV Pages: 3
Toyota 2005 ECHO User Manual preview
2005 ECHO
Brand: Toyota Pages: 433
Kia K900 2017 Features & Functions Manual preview
K900 2017
Brand: Kia Pages: 62

Brands by name

Popular brands

Load more brands