manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Towing a trailer

200

WARNING

It is essential that you adjust your speed to suit the weather, road 
and traffic conditions. Do not let the trailer stabilisation system 
tempt you into taking any risks when driving – this can cause acci-
dents.

•

The ESP and trailer stabilisation system cannot defy the laws 

of physics. This should be kept in mind, particularly on slippery 
and wet roads and when towing a trailer with a light load.

•

The trailer stabilisation system is functional, regardless of 

whether the trailer has a mechanical overrun brake or not.

•

The trailer stabilisation system is not always able to detect 

swaying of trailers with a light load and will therefore not inter-
vene.

•

A trailer can still “jack-knife” on slippery roads with little grip, 

even if the towing vehicle is equipped with the trailer stabilisation 
system.

•

Trailers with a high centre of gravity may even tip over before 

they start to sway sideways.

•

If you are not towing a trailer, but the trailer socket is being 

used (e.g. for an illuminated bicycle rack), the trailer stabilisation 
system may be activated in extreme driving conditions.

•

Please note the additional information and warnings 

⇒

page 200.

Notes on towing

Driving with a trailer always requires extra care.

Weight distribution

Try to avoid towing a loaded trailer with an unladen vehicle. If this 
cannot be avoided, drive extra slowly to allow for the unbalanced 
weight distribution.

Speed

The stability of the car and trailer is reduced with increasing speed. 
For this reason it is advisable not to drive at the maximum permis-
sible top speed in unfavourable road, weather or wind conditions. 
This applies especially on a downhill gradient.

You should always reduce speed immediately if the trailer shows 
the slightest sign of swaying. Never try to stop the swaying by accel-
erating further.

Always brake in good time. If the trailer has an overrun brake, apply 
the brakes gently at first and then firmly. This will prevent the jerking 
that can be caused by the trailer wheels locking. Change down in 
good time before going down a steep hill so that you can use the 
engine braking effect to slow down the vehicle.

Swaying and pitching can be reduced by stabiliser aids. We recom-
mend having stabiliser aids installed when towing trailers with a 
high trailer weight. They can be purchased and installed at an Audi 
dealer.

Overheating

When climbing long hills in hot weather with the engine running 
fast in low gear, you should keep an eye on the coolant temperature 
gauge 

⇒

page 11. Reduce speed immediately if the needle moves to 

the top end of the scale. If the temperature warning lamp 

 in the 

instrument cluster should start flashing, stop the car and let the 
engine cool down by running it at idling speed for a few minutes.

document_0900452a81793dcc.book  Seite 200  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
Toyota 1973 Crown Hardtop Owner'S Manual preview
1973 Crown Hardtop
Brand: Toyota Pages: 50
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Phonocell 6/821 Mounting Instructions preview
6/821
Brand: Phonocell Pages: 8
Volvo 31339699 Installation Instructions, Accessories preview
31339699
Brand: Volvo Pages: 18
Ford transit connect 2012 User Manual preview
transit connect 2012
Brand: Ford Pages: 299

Brands by name

Popular brands

Load more brands