manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Checking and topping up fluids

229

Controls

Safety

Driving tips

General maintenance

Self-help

Technical data

Important safety warnings for handling a car 
battery

All work on batteries requires specialist knowledge.

The vehicle battery is located under the floor panel in the luggage 
compartment.

WARNING

Always be aware of the danger of injury and chemical burns as 
well as the risk of accident or fire when working on the battery and 
the electrical system.

•

Wear safety glasses. Do not allow acid or lead particles to come 

into contact with eyes, skin or clothing.

•

Battery acid is extremely corrosive. Wear protective gloves and 

safety glasses. Do not tilt the battery - acid can leak out of the 
vapour vent. If electrolyte should splash into the eyes rinse at once 
for several minutes using clear water. Then seek medical care 
immediately. Neutralize any acid splashes on the skin or clothing 
with soap solution, and rinse off with plenty of water. If acid is 
swallowed by mistake, consult a doctor immediately.

•

Keep open flames, sparks, uncovered lights and lit cigarettes 

away from battery. Avoid sparks (including those from static 

charges) when handling cables and electrical equipment. Never 
cross the battery poles. The resulting high-energy sparks can 
cause injury.

•

A highly explosive mixture of gases is given off when the 

battery is under charge. Only charge battery in a well ventilated 
area.

•

Keep children away from the battery and battery acid.

•

Switch off all electrical equipment before starting any work on 

the vehicle electrical system. Remove the ignition key. The minus 
cable of the battery must be disconnected. When changing a light 
bulb, it is sufficient to only turn off the light.

•

Before disconnecting the battery, turn off the anti-theft 

system! Otherwise, the alarm will sound.

•

When disconnecting the battery from the vehicle's electrical 

system, first disconnect the minus cable and then the plus cable.

•

Before reconnecting the battery, turn off all electrical equip-

ment. First connect the plus cable, then the minus cable. The 
battery cables must not be connected to the wrong battery poles 
- serious risk of cable fire.

•

Never charge a frozen or thawed out battery - risk of explosion 

and chemical burns! A battery must be replaced once it has been 
frozen. When it is discharged the battery can freeze at tempera-
tures around 0°C.

•

Make sure that the vapour hose is always attached to the 

battery.

•

Never use a damaged battery - risk of explosion! Replace a 

damaged battery immediately.

Caution

•

Never disconnect the car's battery with the engine running or 

with the ignition turned on, otherwise the electrical system or elec-
trical components will be damaged.

Wear safety glasses!

Battery acid is extremely corrosive. Wear protec-
tive gloves and safety glasses.

Keep open flames, sparks, uncovered lights and 
lit cigarettes away from battery!

A highly explosive mixture of gases is given off 
when the battery is under charge!

Keep children away from the battery and battery 
acid.

WARNING (continued)

document_0900452a81793dcc.book  Seite 229  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Curtis 1POLXP1000GS Installation & Owner'S Manual preview
1POLXP1000GS
Brand: Curtis Pages: 5
Kargo Master 409CD Installation Manual preview
409CD
Brand: Kargo Master Pages: 7

Brands by name

Popular brands

Load more brands