manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Driving

122

Press brake pedal to release parking brake

This message may appear when you press the switch to release the 
parking brake. The parking brake can only be released, if you 
depress the brake pedal and simultaneously press the switch or if 
you use the parking brake auto release function 

⇒

page 120.

 

Parking brake malfunction !

This message will appear together with the yellow symbol 

 if a 

malfunction should occur in the parking brake.

Fault in parking brake auto release

This driver message will appear in the event of a malfunction of the 
parking brake auto release. The automatic release of the parking 
brake when moving off from a standstill is not functioning correctly. 
The parking brake must be released manually by pressing the 
switch. Have the fault rectified by a qualified workshop.

Audi hold assist

Audi hold assist helps the driver when the vehicle is 
stationary and automatically prevents the vehicle from 
rolling away when driving off.

When the Audi hold assist function is on, the vehicle is auto-
matically prevented from rolling away and you no longer 
have to keep your foot on the brake pedal.

Conditions for switching on Audi hold assist

– The driver's door must be closed.

– The driver's seat belt must be buckled.

– The engine must be running.

Switching on Audi hold assist

– Press button 

 

⇒

fig. 134 in the centre console to switch 

on the Audi hold assist function. The indicator lamp in 
the switch will light up.

Switching off Audi hold assist

– Press button 

 

⇒

fig. 134 to switch off the Audi hold 

assist function. The indicator lamp in the switch will go 
out.

– If you press button 

 while the vehicle is being held by 

the Audi hold assist function, the electro-mechanical 
parking brake 

 will automatically take over. The 

parking brake will not take over if the foot brake is 
applied simultaneously.

– Audi hold assist is switched off automatically if you open 

the driver's door, unbuckle the seat belt or switch off the 
engine. If this happens when the green symbol 

 is 

displayed in the instrument cluster, the parking brake 
will be applied automatically to ensure that the vehicle is 
parked safely.

Audi hold assist helps the driver to keep the vehicle stationary while 
the engine is running, for instance on steep gradients, at traffic 

Fig. 134  Detail of the 
centre console: Button 
for Audi hold assist

A

B

A

B

A

B

document_0900452a81793dcc.book  Seite 122  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Barker 25895 Owner'S Instructions preview
25895
Brand: Barker Pages: 2
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
Elinchrom ELB 1200 User Manual preview
ELB 1200
Brand: Elinchrom Pages: 101

Brands by name

Popular brands

Load more brands