Audi S5 CABRIOLET Owner'S Manual Download Page 156

Page: 156 / 294

Safe driving

154

Correct sitting positions

Correct sitting position for driver

The correct driving position is important for safe and
fatigue-free driving.

For your own safety, and to reduce the risk of injury in the
event of an accident, we recommend the following driving
position.

– Adjust the steering wheel so there is a distance of at least

25 cm between the steering wheel and your breastbone

⇒

fig. 162.

– Move the driver's seat forwards or backwards so that you

can press the accelerator, brake and clutch pedals all the
way to the floor with your knees slightly bent

⇒

– Make sure that you can comfortably reach the top of the

steering wheel.

– Adjust the head restraint so that the top of the head

restraint is level with the top of your head

⇒

fig. 163.

– Adjust the backrest to an upright position so that your

back remains in contact with the upholstery.

– Fasten your seat belt correctly

⇒

page 160.

– Keep both feet in the footwell so that you are in full

control of the vehicle at all times.

For detailed information on how to adjust the driver's seat, see

⇒

page 70, “Seats and storage”.

WARNING

•

A driver who is not sitting in the correct position or who is not

wearing a seat belt can be fatally injured if the airbag is triggered.

•

Adjust the driver's seat so there is a distance of at least 25 cm

between your breastbone and the centre of the steering wheel

⇒

fig. 162.

•

While driving, always hold the steering wheel with both hands

on the outside of the rim at about the 9 o'clock and 3 o'clock posi-
tion. This reduces the risk of injury if the driver's airbag inflates.

•

Never hold the steering wheel at the 12 o'clock position, or

with your hands inside the rim or on the steering wheel hub. This
could result in serious injuries to the arms, hands and head if the
driver's airbag inflates.

•

To reduce any risk of injury to the driver during a sudden brake

application or in an accident, never drive with the backrest tilted

Fig. 162 Minimum
distance between
driver and steering
wheel

Fig. 163 Correct head
restraint position for
the driver

document_0900452a81793dcc.book Seite 154 Mittwoch, 21. März 2007 5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Search results

Summary of Contents for S5 CABRIOLET

Reviews:

Related manuals for S5 CABRIOLET

Brands by name

Popular brands

Audi S5 CABRIOLET, Owner'S Manual

Search results

Summary of Contents for S5 CABRIOLET

Reviews:

Related manuals for S5 CABRIOLET

Brands by name

Popular brands