manualshive.com logo in svg

Audi S5 CABRIOLET, Owner'S Manual

The Audi S5 Cabriolet's Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides essential information and guidance on operating and maintaining your Audi S5 Cabriolet. Get the most out of your vehicle's features and ensure a smooth driving experience with this informative manual.

Share
Download
background image

Towing a trailer

199

Controls

Safety

Driving tips

General maintenance

Self-help

Technical data

additional mirrors fitted. Both exterior mirrors should be mounted 
on hinged extension brackets. Adjust the mirrors to give sufficient 
vision to the rear.

Power supply

When you remove the ignition key the power supply to the trailer is 
interrupted.

Removable ball joint coupling

Vehicles with a factory-fitted towing bracket are equipped with a 
removable ball joint coupling. It is carried under the floor panel on 
the left-hand side of the luggage compartment.

Note

We recommend having the car serviced between the normal inspec-
tion intervals if it used frequently for towing a trailer.

Applies to vehicles: with towing bracket

Trailer stabilisation system

Trailer stabilisation helps to reduce the risk of the vehicle 
skidding when towing a trailer.

When is the trailer stabilisation system activated?

Trailer stabilisation is active when the following requirements are 
met:

•

The ESP must NOT be switched off 

⇒

page 186,

•

The trailer connector must be properly secured in the vehicle 

socket.

•

Vehicle speed must be higher than approx. 60 km/h.

How trailer stabilisation works:

In many cases, the driver can stabilise a swaying trailer by manually 
braking the vehicle.

However, if the ESP detects that the trailer is swaying and this is 
affecting the towing vehicle, it will automatically brake the vehicle 
to stabilise the trailer by slowing it down. The warning lamp 

 will 

light up in the instrument cluster. If possible, do not turn the 
steering wheel at this stage.

In order to warn traffic behind you, the brake lights will come on 
during this automatic braking operation.

A trailer weighing less than 70% of the kerb weight of the towing 
vehicle may sway quite considerably without the trailer stabilisation 
system intervening. This can happen when the swaying movements 
of the light-weight trailer are not or hardly passed on to the towing 
vehicle and are therefore not detected by the ESP.

If the system for activating the trailer brake lights is defective, this 
will be indicated in the instrument cluster display 

⇒

page 36, “Bulb 

monitor 

”.

Requirements for correct functioning of the trailer 
stabilisation system

If these conditions are not met in full, the trailer stabilisation system 
will only intervene to a limited extent or not at all 

⇒

.

•

The electrical connection between the towing vehicle and the 

trailer must be functioning correctly, without any defects.

•

The load on the trailer must be properly secured.

•

The tyre pressures on both the vehicle and the trailer must be 

adapted to the load that is being carried.

•

Where possible, operate the trailer with the maximum permitted 

draw bar weight.

•

The trailer overrun brake must be set correctly. This is important 

to ensure that the trailer can be braked correctly, to avoid the vehicle 
and trailer “jack-knifing” and to prevent excess braking of the trailer.

•

In low outside temperatures, both the towing vehicle and the 

trailer should be fitted with winter tyres.

document_0900452a81793dcc.book  Seite 199  Mittwoch, 21. März 2007  5:42 17

Summary of Contents for S5 CABRIOLET







































































































































































































































































































Reviews:

No comments

Related manuals for S5 CABRIOLET

Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
Mercedes-Benz R 350 2012 Operator'S Manual preview
R 350 2012
Brand: Mercedes-Benz Pages: 368
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
Xpresskit DBALL2-HK7 Installation Manual preview
DBALL2-HK7
Brand: Xpresskit Pages: 18
Thule 1061-1-011 Fitting Instructions preview
1061-1-011
Brand: Thule Pages: 3
Veldo Teknoloji DUCATO Manual preview
DUCATO
Brand: Veldo Teknoloji Pages: 32
Air Lift 88365 Installation Manual preview
88365
Brand: Air Lift Pages: 28
Dolphin DAS400 Owner'S Manual preview
DAS400
Brand: Dolphin Pages: 16
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12

Brands by name

Popular brands

Load more brands