ashtech HDS800, Reference Manual

Page: 385 / 678

369
Set Command Library
See also
$PASHS,RAW,PER
$PASHS,RAW,ALL
$PASHS,POP
RAW,ALL: Disabling All Raw Data Messages
Function
This command is used to disable all the currently active raw
data messages on the specified port.
Command Format
Syntax
$PASHS,RAW,ALL,c1,OFF[*cc]
Parameters
Example
Disabling all raw data messages on port A:
$PASHS,RAW,ALL,A,OFF*52
Relevant Query
Command
None.
See Also
$PASHS,RAW
RAW,PER: Setting Unique Output Rate for Raw Data
Function
This command is used to set the same output rate for raw
data messages MPC, DPC and PBN. This command will
overwrite the output rates set individually for each of these
message types using $PASHS,RAW,xxx. Setting this rate does
not affect the data recording rate (set with $PASHS,DRI).
Parameter Description Range
c1
Port ID
• Serial ports: A, B, F
• Bluetooth port: C
• Ethernet port: I, I1-I9
• Memory: M, U
• R: Data recording through session
A, B, C, F,
I, M, U,
I1-I9, R
*cc Optional checksum *00-*FF