ashtech HDS800, Reference Manual

Page: 625 / 678

609
Data Output
Reminder on How
to Output SNV
Messages
Use the $PASHS,RAW command with the syntax below:
$PASHS,RAW,SNV,<port_ID>,ON,<Rate>
For more details on the $PASHS,RAW command, refer to the
Set Command Library Chapter.
As an example, the command below will output SNV
messages on port A at a rate of 15 seconds:
$PASHS,RAW,SNV,A,ON,15
Unsigned
short
Checksum 2
The checksum is computed by breaking the struc-
ture into 37 unsigned shorts, adding them
together, and taking the least significant 16 bits of
the result.
Total 76
Type Name Size Contents