ashtech HDS800, Reference Manual

Page: 315 / 678

299
Set Command Library
Parameters
Examples
Selecting DBEN message type “RPC” at 0.5 second:
$PASHS,DBN,TYP,RPC,0.5*26
Selecting DBEN message type “BPS” at 60 seconds:
$PASHS,DBN,TYP,BPS,60*0B
Relevant Query
Command
$PASHQ,DBN,MSI
See Also
$PASHS,BAS
$PASHS,BDS
DDN,PAR: Setting the DynDNS Service
Function
This command is used to activate or deactivate a connection
to a service ensuring that the receiver hostname will always
be associated with the dynamic IP address your Internet
Service Provider has last assigned to the receiver.
The successful use of the service requires that you first open
an account on this service.
Command Format
Syntax
$PASHS,DDN,PAR[,DYN,d1][,SYS,s2][,USR,s3][,PWD,s4][,HNM,s5]
[,PER,d6][*cc]
Parameter Description Range
s1 Message type See table below
d2 Output rate, in seconds See table below
*cc Optional checksum *00-*FF
Type Description Range
Default
Output Rate
RPC Code & phase measurement 0, 0.1-0.9 s and 1-300 s 1
BPS Reference station position 0-300 s 30