ashtech HDS800, Reference Manual

Page: 272 / 678

256
Set Command Library
the receiver, the predefined parameters can be listed
using $PASHQ,ANP. New offset parameters can be added
using $PASHS,ANP,PCO.
• The predefined list complies with the IGS antenna source
table.
• The antenna name (and the optional serial number and
setup ID) are also inserted into the RTCM antenna
message when the receiver is used as a base.
Example
Entering “ASH111661” as the name of the receiver antenna
name and “201115864” as the receiver serial number:
$PASHS,ANP,OWN,ASH111661,201115864*36
Relevant Query
Commands
$PASHQ,ANP
$PASHQ,ANP,OWN
See Also
$PASHS,ANP,REF
ANP,OW2: Naming the Second Local Antenna
Function
This command is used to enter the name of the second GNSS
antenna to which the receiver is connected.
Command Format
Syntax
$PASHS,ANP,OW2,s1[,s2][,d3][*cc]
Parameters
Comments
• Specifying the antenna name allows the receiver to know
the antenna offset parameters using a predefined list. In
the receiver, the predefined parameters can be listed
using $PASHQ,ANP. New offset parameters can be added
using $PASHS,ANP,PCO.
Parameter Description Range
s1
User-defined antenna name (case-sensitive)
for second GNSS antenna connected to the
receiver. Default name is “UNKNOWN”
31 characters max.
s2 Antenna serial number 31 characters max.
d3 Antenna setup ID 0-255
*cc Optional checksum *00-*FF