ashtech HDS800, Reference Manual

Page: 435 / 678

419
Set Command Library
TLT,INIT: Defining the String Used to Initialize the Tiltmeter
Function
This command is used to define the character string that will
initialize the tiltmeter. The command also specifies the ID of
the receiver port used to communicate with the tiltmeter.
The initializing string is in the form “*xxxxxx”. There is no
initialization string defined by default.
Command Format
Syntax
$PASHS,TLT,INIT,c1,s2[*cc]
Parameters
Example
Setting initialization string to “*9900ID”, tiltmeter
connected to port F:
$PASHS,TLT,INIT,F,9900ID*44
Relevant Query
Command
$PASHQ,TLT
See Also
$PASHS,TLT,CMD
$PASHS,TLT,INTVL
$PASHS,OUT,x,TLT
Parameter Description Range
c1 Receiver serial port connected to the tiltmeter. A, B, F
s2
Initialization string (not including the leading
“*” character)
20 characters max.
*cc Optional checksum *00-*FF