ashtech HDS800, Reference Manual

Page: 549 / 678

533
Query Command Library
Command Format
Syntax
$PASHQ,RCP[*cc]
or
$PASHQ,RCP,s1[*cc]
Parameters
Response Format
The response is in user-readable form.
$PASHQ,RCP
PREDEFINED RECEIVER LIST (d1):
ASHTECH ProMark800
ProFlex800 MB500
PM5 MMapper100
ProMark100 ProMark200
MB100 NOVATEL
TRIMBLE SEPTENTRIO
TOPCON
USERDEFINED RECEIVER LIST (d2):
RCV10 RCV11
RCV12 RCV13
…
OWN RECEIVER: ProFlex800
REFERENCE RECEIVER:
RECEIVED RECEIVER:
Where:
• d1 is the number of pre-defined receivers
• d2 is the number of user-defined receivers
• “Own receiver” refers to the name of the receiver
• “Reference receiver” provides the name of the base
receiver, as set through the command $PASHS,RCP,REF
• “Received receiver” provides the name of the base
receiver, as received through the differential data stream.
$PASHQ,RCP,s1 provides the GLONASS carrier phase biases
for the specified, user-defined receiver.
$PASHQ,RCP,MyReceiver
MyReceiver:
L1 BIAS: +0.059,+0.613 +0.671 +0.729 +0.786 +0.829 +0.898 +0.949
+0.000 +0.059 +0.112 +0.182 +0.253 +0.312 +0.373
L2 BIAS: +0.049,+0.667 +0.714 +0.761 +0.808 +0.849 +0.893 +0.947
Parameter Description Range
s1
Name of the receiver (case sensitive).
If s1 is omitted, the parameters for all the receiv-
ers described in the database are listed.
31 characters
max.
*cc Checksum *00-*FF