ashtech HDS800, Reference Manual

Page: 89 / 678

73
Using the Web Server
• Use one of the typical applications described below to
make the generated data available to users:
– Radio transmitter
– Direct IP via modem
– Direct IP via Ethernet
– NTRIP server via modem
– NTRIP server via Ethernet
– RTK corrections delivered on port A, B or F
– Ethernet data streaming.
Radio Transmitter
• Click on
Base Setup > Transmitter
and define the general
parameters of the base, as explained in section General
Parameters on page
67
. Then proceed with the steps
below.
• Scroll down the page to display the Transmitter frame. In
the
Message
field, select the type of differential data the
base will generate and the radio will transmit (ATOM,
RTCM, CMR, CMR+ or DBEN). Following your selection,
you will see the detail of the selected data on the right of
this field, as defined in
Data Output > Differential Messages
.
• In the
Device
field, select the type of the radio transmitter
the base is using (the internal or an external one).
Depending on the type of radio used, you will have to
HDS800
RTK Corrections
Serial Port
HDS800
RTK Corrections
Radio
UHF Connector
External Radio
(Internal)