ashtech HDS800, Reference Manual

Page: 116 / 678

100
Web Server Help Files Collection
Status Tab
Satellites
The Satellites page details the data received from the
different constellations. The information provided is split into
six tabs: Status, GPS, GLONASS, GALILEO, SBAS and Polar
View.
Status:
Status
Port status, depends on the port type:
• Always “On” for ports A to D. If for some
reason, the port assigned to a differential
message is off, then no information at all
would be reported for this message.
• For ports E, P and Q, there are three
possible statuses: “Connected” means the
connection is active, “Dialing” means the
connection to the socket is in progress,
“Automatic dial programmed (x s)” means
the connection is not active but attempts
to connect are run every x seconds (x=10
s for ports P and Q and x=50 s for port E).
• For ports Ix, when used in connections
where your receiver is the server, the
Status field provides the number (n) of
current connections to the server: “ n
connection(s)”.
• For ports Ix, when used in connections
where your receiver is the client, there are
several possible statuses: “Connected”,
“Init in progress” or “Dialing”.
-
Communication
Type
For a base, identifies the destination of the
differential message.
For a rover, identifies the source of the differ-
ential message.
-
Messages
Detail of the differential message generated
by the base, or received by the rover, on this
port. For a rover receiver, each message
listed in this area includes rate and age
information.
-
Parameter Designation $PASHQ
Parameter Designation $PASHQ
GPS
Indicates that the receiver has the GPS recep-
tion capability (always On).
-
GLONASS
Indicates whether the receiver has the
GLONASS reception capability (On) or not
(Off).
GLO
GALILEO
Indicates whether the receiver has the GALI-
LEO reception capability (On) or not (Off).
GAL