ashtech HDS800, Reference Manual

Page: 173 / 678

157
Web Server Help Files Collection
Configuration Tab
Bluetooth
Use this area to enter the Bluetooth parameters of the
receiver.
Internal Modem - Device Settings
Use this area to enter the parameters of the internal modem.
Parameter Designation $PASHS
Address
(A Read-Only parameter). This field provides
the MAC address of the Bluetooth device in
the receiver (hardware identification of the
device).
($PASHQ,BTH)
Device Name
Freely choose a label (64 characters max.) to
designate the Bluetooth device in the receiver.
BTH,NAME
Secured Con-
nection
Enable this option if you want to secure the
connection of the receiver with any remote
Bluetooth device. With a secured connection,
any Bluetooth client will be asked to enter a
pin code before it is allowed to communicate
with your receiver.
If this option is disabled, no pin code will be
required and the connection will be estab-
lished directly.
BTH,PIN
Pin Code
This field is displayed only after you have
enabled the Secured Connection option. Enter
a pin code (any number between 0 and
99999999). This pin code will be requested
every time an external Bluetooth device will
attempt to connect to your receiver.
BTH, PIN
Parameter Designation $PASHS
Power On/Off
Select “On” to power on the modem, or “Off” to
power it off. MDM,OFF
or ON
Automatic/Manual
Power
Choose one of the options below:
• Automatic: The modem will be powered on
automatically when the receiver is powered
on.
• Manual: The modem will be powered on
only on request from the receiver.
MDM,PAR
Automatic Con-
nection Enable this option for a rover using the internal
modem in CSD or GPRS mode.
MDM,PAR
2G Only
Tell whether the internal modem should be
forced to operate in a 2G network only (On) or
allowed to operate in any network, whether a
2G or 3G network (Off).
MDM,PAR
Pin
Pin code (4 to 8 digits) of the SIM card used
by the modem.
MDM,PAR