ashtech HDS800 Reference Manual Download Page 367

Page: 367 / 678

351

Set Command Library

If the receiver fails to download the source table, the
following response line will be returned:

$PASHR,NTR,FAIL*12

Relevant Query

Command

None.

See also

$PASHQ,NTR,TBL

$PASHS,NTR,PAR

NTR,MTP: Connecting Receiver to NTRIP Caster Mount Point

Function

This command allows you to connect the receiver to a NTRIP
caster mount point.

Command Format

Syntax

$PASHS,NTR,MTP,s1[,c2][*cc]

Parameters

Example

Connecting to mount point MUWF0:

$PASHS,NTR,MTP,MUWF0*4D

If the connection is successful, the following response line
will be returned:

$PASHR,NTR,OK*cc

If the connection failed, the following response line will be
returned:

Parameter

Description

Range

Name of the NTRIP mount point, or OFF command
(ending the connection to the current mount point).

100 characters
max., or OFF

Internet port used to connect to the caster:
• E: Internal modem
• P: Ethernet stream 1
• Q: Ethernet stream 2

If c2 is omitted, the port used is the port defined
through the last $PASHS,NTR,PAR command run.

E, P, Q

*cc

Optional checksum

*00-*FF

Summary of Contents for HDS800







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HDS800

Reviews:

Related manuals for HDS800

Brands by name

Popular brands

ashtech HDS800, Reference Manual

Search results

Summary of Contents for HDS800

Reviews:

Related manuals for HDS800

Brands by name

Popular brands