ashtech HDS800, Reference Manual

Page: 343 / 678

327
Set Command Library
Parameters
Examples
Transferring a single file (G1234A09.134) to the FTP server:
$PASHS,FTP,PUT,,,,G1234A09.134*59
Transferring two files (GabcdA09.134 and GabcB09.134) to
the FTP server:
$PASHS,FTP,PUT,0,,,GabcdA09.134,GabcB09.134*11
Transferring all the files from the internal memory to the FTP
server:
$PASHS,FTP,PUT,0,,,”*.*”*54
Transferring all the files from the USB key collected on day
65 to the FTP server:
$PASHS,FTP,PUT,2,,,’*.65’*ED
Comments
• Right after submitting a command line, the following
response line will be returned if the command syntax is
correct:
Parameter Description Range Default
d1
Memory where the files to be
transferred can be found:
• 0: Receiver’s internal memory
• 2: USB key
• If d1 is missing, the memory
selected through $PASHS,MEM
is the one where the files should
be found.
0,2 -
s2
Subfolder created on the FTP
server, in the folder specified in the
Path parameter (PTH,s5) of the
$PASHS,FTP,PAR command.
If s2 is not specified, files are
saved directly in the <Path> folder.
255 characters
max.
Empty
s3 Remote path on FTP server
255 characters
max.
Empty
s4-s13
Names of the files to be uploaded
to the FTP server.
The “*” character can be used to
select several files. In this case,
the filename string should be
placed between quotation marks (”
or ‘)
255 characters
max.
*cc Optional checksum *00-*FF