ashtech HDS800, Reference Manual

Page: 121 / 678

105
Web Server Help Files Collection
Status Tab
Serial Ports
The Serial Ports page provides the current configuration of
each of the receiver serial ports.
For each port, the following parameters are returned.
Bluetooth &
Modem
The Bluetooth & Modem page provides the current
configuration of Bluetooth and the internal modem. The
modem cannot be used in CSD and GPRS mode at the same
time, however the page shows the current settings for the two
operating modes.
Elevation Mask
Gives the current value, in degrees, of the ele-
vation mask used in data recording and data
output.
ELM
Parameter Designation $PASHQ
Parameter Designation $PASHQ
Baud Rate
Current value of baud rate used on
the port
PRT
Mode
Indicates whether the port is currently
an RS232 (232) or RS422 (422) serial
port. Only port A can be RS422 or
RS232. All the others are necessarily
RS232.
MDP
RTS/CTS
Indicates whether the handshaking
protocol is used (Enabled) or not (Dis-
abled).
CTS
Power
(Relevant to ports B and F only) indi-
cates whether the ports are currently
powered on (On) or not (Off). Ports B
and F are usable and recognized only
when power is applied to them.
ECP