ashtech HDS800, Reference Manual

Page: 445 / 678

429
Set Command Library
See Also
$PASHS,WEB,PAR
WEB,PAR: Web Server Control & Administrator Profile
Function
This command is used to enable or disable the use of the Web
Server and define the profile of the receiver administrator.
There is necessarily one –and just one– administrator profile
per receiver.
Command Format
Syntax
$PASHS,WEB,PAR,s1[,s2,s3[,d4]][*cc]
Parameters
Comments
• The login and password are set to their default values after
the $PASHS,RST or $PASHS,INI command has been run.
• The httpd port is used to access the Web Server through
the network.
If for example the IP address of the receiver is 10.20.2.18
and d4=2500, you should enter the following in the
address bar of your web browser to open the Web Server:
10.20.2.18:2500
Example
Enabling the use of the Web Server with specific login and
password on httpd port 2500:
$PASHS,WEB,PAR,ON,Smith,u7lmyt,2500*69
Relevant Query
Command
$PASHQ,WEB
Parameter Description Range Default
s1
Enables (ON) or disables (OFF)
the Web Server
ON, OFF ON
s2 Administrator login 32 characters max. admin
s3 Administrator password 32 characters max. changeme
d4 httpd port 0-65535 80
*cc Optional checksum *00-*FF