ashtech HDS800, Reference Manual

Page: 240 / 678

224
Integrating HDS800 into Your Application
Monitoring the
Modem
Ending the Direct
IP Connection
NTRIP Station
By following the script described below, and according to the
terminology used in the NTRIP standard, the receiver will be
configured to operate as an “NTRIP server”, that is, a station
capable of delivering its data to an NTRIP caster.
Script
In the example below, it is assumed that the receiver will
generate differential data in RCTM V3.0 format. You may
replace RT3 with RT2 (RTCM2.3), ATOM, CMR or CMP
(CMR+) or DBEN.
See $PASHS,RTC,TYP, $PASHS,RNX,TYP or
$PASHS,CMR,TYP if you want to change the default
messages and periods.
Ask the modem to connect to the server:
NOTE: The ADD field may contain either an
IP address or a host name.
$PASHS,DIP,PAR,ADD, 192.65.54.
1 ,PRT, 80 ,IPP, E
$PASHR,ACK*3D
$PASHS,DIP,ON
$PASHR,ACK*3D
Action Command
Action Command
Query the modem status and settings:
$PASHQ,MDM
$PASHR,MDM,E,9,ONLINE,...
Query the modem signal level:
$PASHQ,MDM,LVL
$PASHR,MDM,LVL,80*6E
Action Command
Ending the Direct IP connection:
$PASHS,DIP,OFF
$PASHR,ACK*3D
Action Command
Set the name of the antenna connected to
the receiver: $PASHS,ANP,OWN, ASH111661
$PASHR,ACK*3D
Set the antenna reduction mode to ON, so
that all coordinates refer to the ground
mark:
$PASHS,ANR,ON
$PASHR,ACK*3D