ashtech HDS800, Reference Manual

Page: 166 / 678

150
Web Server Help Files Collection
Configuration Tab
Differential Port
Use this area to indicate the way the rover should detect the
incoming differential data stream or streams. In Manual
mode, you will need to indicate the port(s) used.
Hot Standby RTK
Hot Standby RTK is the process of making available a second
RTK position solution in the background. Should the primary
RTK solution stop being delivered by the receiver for some
reason, then the second RTK solution would be provided
Password
Enter the password allowing the receiver to establish
the connection with the NTRIP caster.
NTR,PAR
Load
Source
Table
Once the IP address and IP port number of the
NTRIP server have been entered (see above), click
on the Load Source Table button to list the data
stream names available from the NTRIP caster.
Select one from the table. This will complete the
Mount field above automatically.
NTR,LOD
Send NMEA
If the rover operates in a VRS network, check this
button so the rover can return its position to the net-
work through an NMEA message. Keep it cleared in
all other cases.
NME,GGA
Parameter Designation $PASHS
Automatic
Check this option if you want the rover to detect the
incoming differential data stream(s) by itself.
CPD,REM
Manual
Check this option if you want to indicate the port(s) on
which the incoming differential data stream(s) is (are)
received.
CPD,REM
Stream 1,
Stream 2
This field is displayed only when “Manual” is chosen.
Choose the port on which each of the differential data
streams #1 and #2 is received. The possible choices
are:
• None: No incoming differential data stream
• A - Serial: Port A
• B - Serial: Port B
• F - Serial: Port F
• C - Bluetooth
• D - Internal Radio
• E - Modem
• I - Ethernet: Serial-like connection in server mode
• P - Ethernet: NTRIP or Direct IP in client mode
CPD,REM
Parameter Designation $PASHS