ashtech HDS800, Reference Manual

Page: 517 / 678

501
Query Command Library
Example
$PASHQ,GSV
$GPGSV,2,1,07,20,61,066,50,11,30,146,36,13,41,200,50,23,73,134,52*7C
$GPGSV,2,2,07,33,34,198,42,17,40,242,50,04,37,304,48*47
$GLGSV,1,1,04,77,29,098,46,84,19,332,46,83,49,276,52,68,57,300,52*67
See also
$PASHS,NME
Automatic Output
of GSV Messages
This is a reminder on how to output GSV messages at regular
intervals of time: Use the $PASHS,NME command with the
syntax below:
$PASHS,NME,GSV,<port_ID>,ON,<Rate>
For more details on the $PASHS,NME command, refer to the
Set Command Library Chapter.
As an example, the command below will output GSV
messages on port A at a rate of 10 seconds:
$PASHS,NME,GSV,A,ON,10
HDB: Power Status of Second GNSS Board
Function
This command allows you to read the current status of the
second GNSS board.
Command Format
Syntax
$PASHQ,HDB[*cc]
Response Format
Syntax
$PASHR,HDB,s*cc
Parameters
Example
$PASHQ,HDB
$PASHR,HDB,ON*17
Parameter Description Range
s Power status ON, OFF
*cc Checksum *00-*FF