ashtech HDS800, Reference Manual

Page: 69 / 678

53
Using the Web Server
• Click on the
Configure
button to let the Web Server load the
parameters to the radio via the receiver. You just have now
to define the output messages (see
Defining Output
Messages on page 63 ).
Direct IP Via
Modem
The internal modem should be configured first:
• Click on the
Connections
menu and then on the
Bluetooth/
Modem
sub-menu.
• Set the following parameters in the
Internal Modem/Device
Settings
pane:
–
Power
: Select “On”. Then choose whether the modem
should be turned on automatically or manually:
Automatic
: The modem will be switched on or off
automatically when the rover is respectively turned on
or off.
Manual
: The modem will be powered up only by going
through the
Connections
>
Bluetooth/Modem
page,
setting the modem to “Power On” and clicking on the
Configure
button (or using the $PASHS,MDM,ON
command).
–
Automatic Connection
: Check this option.
–
Pin
: 4- to 8-character pin code of the SIM card used in
the modem for GPRS operation.
–
2G Only
: Recommended to save power.
• Set the following parameters in the
Internal Modem/GPRS
Mode Settings
pane (the mobile communication provider
you are using should be able to give you all this
information):
–
Internet Protocol
: Choose the Internet protocol (TCP or
UDP) allowing the modem to perform an Internet
connection.
–
Access Point
: Enter the URL of the mobile
communication provider.
Modem
RTK Corrections
HDS800
Base
(Mobile Wireless
Communication)
Internet
IP address
or server name
(Client)